View TLP561J_1030795.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP561J
TOSHIBA Photocoupler GaAs IRed & Photo-Triac
TLP561J
Triac Driver Programmable Controllers AC-Output Module Solid State Relay
Unit in mm
The TOSHIBA TLP561J consists of a zero voltage crossing turn-on
photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package.
* * * * * *
Peak off-state voltage: 600V(min.) On-state current: 100mA(max.) Isolation voltage: 2500Vrms(min.) UL recognized: UL1577, file no. E67349 Isolation operating voltage: 2500Vac or 300Vdc for isolation Groupe C*1 Trigger LED current
ClassiFication* (IFT7) Standard Trigger LED Current (mA) VT=6V, Ta=25C Min. Max. 7 10 T7 T7, blank Marking Of Classification
TOSHIBA Weight: 0.39g
11-7A9
Pin Configuration (top view)
*Ex. (IFT7); TLP561J(IFT7) (Note ): Application type name for certification test, please use standard product type name, i.e. TLP561J(IFT7): TLP561J *1: According to VDE0110, table 4.
1
2002-09-25
TLP561J
Maximum Ratings (Ta = 25C)
Characteristic Forward current Forward current derating (Ta 53C) LED Peak forward current (100s pulse, 100pps) Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current Detector Ta = 25C Ta = 70C Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol BVS Rating 50 -0.7 1 5 125 600 100 50 -1.1 2 1.2 115 -55~125 -40~100 260 2500 Unit mA mA / C A V C V mA mA / C A A C C C C Vrms
On-state current derating (Ta 25C) Peak on-state current (100s pulse, 120pps) Peak nonrepetitive surge current (Pw = 10ms, DC = 10%) Junction temperature
Storage temperature range Operating temperature range Lead soldering temperature (10s) Isolation voltage (AC, 1min., R.H. 60%)
Recommended Operating Conditions
Characteristic Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 240 25 85 Unit Vac mA A C
2
2002-09-25
TLP561J
Individual Electrical Characteristics (Ta = 25C)
Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt(c) IF = 10mA VR = 5 V V = 0, f = 1MHz VDRM = 600V ITM = 100mA Vin = 240Vrms, Ta = 85C Vin = 60Vrms, IT = 15mA (Fig.1) (Fig.1) Test Condition Min. 1.0 200 Typ. 1.15 30 10 1.7 0.6 500 0.2 Max. 1.3 10 1000 3.0 Unit V A pF nA V mA V / s V / s
Coupled Electrical Characteristics (Ta = 25C)
Characteristics Trigger LED current Inhibit voltage Leakage in inhibited state Capacitance (input to output) Isolation resistance Symbol IFT VIH IIH CS RS Test Condition VT = 6V, RL = 100 IF = Rated IFT IF = Rated IFT VT = Rated VDRM VS = 0, f = 1MHz VS = 500V AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. 5x1010 2500 Typ. 5 200 0.8 1014 5000 5000 Max. 10 50 600 Unit mA V A pF Vrms Vdc
Fig.1: dv / dt test circuit
3
2002-09-25
TLP561J
4
2002-09-25
TLP561J
5
2002-09-25
TLP561J
RESTRICTIONS ON PRODUCT USE
*
000707EBC
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice.
*
*
* *
*
6
2002-09-25

▲Up To Search▲

Price & Availability of TLP561J

	To Download TLP561J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .